Course Content
Clinical Measures
Clinical measures are taken by the prescribing Podiatrist during a consultation. Certain measurements are required for the design of a well balanced orthotic device. In this topic we will discuss: Scan Angle, Forefoot Varus, Forefoot Valgus and other measurements.
0/3
Scan Angle
Forefoot Varus
Forefoot Valgus
Shoe Fitting
Explains the features found in the Shoe Fitting section of OBD's prescription software.
0/6
Shoe Sizing Charts
Sneaker Grind
Plantar Grind
45° Cutout
Shoe Fit Options
Additional Options
Intrinsic Adjustments
Defines and explains the meaning of the Intrinsic Adjustments section in OBD's prescription software.
0/8
Plantar Fascia Accomodation (PFA)
Medial and Lateral Arch Fill
Medial and Lateral Rear Foot Posting (RF Posting)
Inversion and Eversion Ramping
Heel Cup Adjustments
Intrinsic Heel Lift
Metatarsal Wedging
Skives
Off Loading
Explains the features found in the Off Loading section of OBD's prescription software.
0/6
Cuboid Raises & Dells
Styloid Raises & Dells
Navicular Raises & Dells
Apertures
Poron U-Pads
Metatarsal Domes & Pads
Device Options
Explains the various features you can utilise in your orthotics - found in the Device Options section of OBD's prescription software.
0/4
Intrinsic Options
Extrinsic Options
Extension
Custom Shaping
Materials
Explains the varying base block, mid layer and top cover materials available for selection in OBD's prescription software.
0/1
Materials Overview
Prescription Training
About Lesson

Styloid Raise

Styloid Dells have a minimum value of -20mm, and Raises have a max value of +10mm.

A positive value in this field will request a Styloid Raise. Selecting a positive value will display a list of available materials that can be selected.


Styloid Dell

A negative value in this field will request a Styloid Dell. Selecting a negative value will display a list of available materials that can be selected.

Remember that the depth of a Styloid Dell is limited by the height of the styloid from the ground.

The adjustment will generally be blended with a smoothing function in software, or during manual finishing post-machining.

 

Previous
Next